PET Rolls and sheets

With Mono or Coex technologhy, PET rolls and sheets can produce from 50 micron to 1000 micron. Annual capacity 20.000 ton.

 

Product PET-A PACKAGING

Thickness: 50µ – 1000µ

Width: ≤1450mm ± 1mm

Coil diameter: ≤1200mm ± %3

 

Usage areas;

Forming, sealing lamination, source.
Compound Outer Layer: % 100 Original PET Resin or %100 Recycled PET

Middle Layer: %100 Original PET Resin or Recycled PET

A/A/A ,  A/B/A , R-PET

A/B/A PET: With co-ex technology.

B-middle layer 70-80% R- Pet
Raw Material Specification Color: Transparent

Elongation:  4 %

Tensile strength: 47 MPa

Impact Resistance:  595 KJ / m2

Melting Point:  243 oC

Density: 1,33 -1,38 g/cm3

Vicat softening: 80°C

Water absorption: 0,5 %
Chemical Properties Determination of Overall Migration:

Fatty Food Alternative Simulant Isooctane

Fatty Food Alternative Simulant Ethanol 95%

Asidic Food, Food Simulant B, 3% Acetic Acid

Aqueous Food, Food Simulant A,Ethanol (10%)

Fatty Food, Food Simulant D1, Ethanol(50%)

(Referance TS EN 1186/1-15) ≤ 10 mg/dm2

 

Determination of Bisphenol A Migration (Aqueous Simulant)

(Referance BS EN 14350-2 / BS EN 14372) ≤ 0,6 mg/kg

 

IR Spektrum : ( Method FT-IR )

Analysis Result: POLYETHYLENE TEREPHTHALATE
Shelf Life 2 years
Storage Conditions It should be stored in a place moisture-free, odor and no sunlight, dry and stored in a cool place.
Distribution and Transport Conditions
  1. It is carried by clean and odorless trucks.
  2. Keep away from direct sunshine.
  3. Store it in a dry place.
  4. Do not stow.
  5. Warehouse’s heat should be min: 4 0C / max: 45 0C.
Allergens No
Optionally Options Color: Production according to reference color

 

PE Lamination: Applicable on one surface

PET/PE/EVOH: Applicable on one surface

 

There may be deviations in the given values. These deviations may be due to technological reasons and therefore Armasan can not be indicted.

The values ​​are for unformed sheets. The assessment for the intended suitability is the responsibility of the customer.

 

 

 

Product PET

Thickness; 150µ – 800µ

Cutted Dimensions; ≤1200*1600mm

 

Usage areas;

Boxes & UV-Offset or Silk Screen printing
Compound Outer Layer: % 100 Original PET Resin

Middle Layer: %100  Original PET Resin or Recycled PET

A/A/A , A/B/A , G/G/G , G/A/G
Raw Material Specification Color: Transparent

Elongation:  4 %

Tensile strength: 47 MPa

Impact Resistance: 595 KJ/m²

Density: 1,35 g/cm3 ± 0,05 g/cm3

Melting point: ~77°C

Surface tension: ≥ 38 dyn
Chemical Properties Determination of Overall Migration:

Fatty Food Alternative Simulant Isooctane

Fatty Food Alternative Simulant Ethanol 95%

Asidic Food, Food Simulant B, 3% Acetic Acid

Aqueous Food, Food Simulant A,Ethanol (10%)

Fatty Food, Food Simulant D1, Ethanol(50%)

(Referance TS EN 1186/1-15) ≤ 10 mg/dm2

 

Determination of Bisphenol A Migration (Aqueous Simulant)

(Referance BS EN 14350-2 / BS EN 14372) ≤ 0,6 mg/kg

 

IR Spektrum : ( Method FT-IR )

Analysis Result:  GLYCOL MODIFIED POLYETHYLENE TEREPHTHALATE

 
Shelf Life 2 years
Storage Conditions It should be stored in a place moisture-free, odor and no sunlight, dry and stored in a cool place.
Distribution and Transport Conditions
  1. It is carried by clean and odorless trucks.
  2. Keep away from direct sunshine.
  3. Store it in a dry place.
  4. Do not stow.
  5. Warehouse’s heat should be min: 4 0C / max: 45 0C.
Allergens No
Optionally Options Color: Production according to reference color

 

Corona: Applicable to single or double surface

Matte Finish: Applicable to single or double surface , matte /  matte

 

There may be deviations in the given values. These deviations may be due to technological reasons and therefore Armasan can not be indicted.

The values ​​are for unformed sheets. The assessment for the intended suitability is the responsibility of the customer.

 

 

Product PET G PACKAGING

Thickness; 100µ – 800µ

Width; ≤1400 mm

 

Usage areas;

Forming, sealing lamination, source.
Compound Outer Layer: % 100 Original PET-G Resin

Middle Layer: %100  Original PET-A Resin or Recycled PET

G/G/G & G/A/G
Raw Material Specification Color: Transparent

Elongation:  5,2 %

Tensile Strenght: 53 MPa

Impact Resistence: 595 KJ/m²

Density: 1,27 g/cm3 ± 0,05 g/cm3

Vicat Softening: 80-90°C

Water absorption: 0,2-0,35 %

Melting point: 140°C

E-modül: 2,1GPa

B1 / Class 1Y / UL 94 HB fire resistance
Chemical Properties Determination of Overall Migration:

Fatty Food Alternative Simulant Isooctane

Fatty Food Alternative Simulant Ethanol 95%

Asidic Food, Food Simulant B, 3% Acetic Acid

Aqueous Food, Food Simulant A,Ethanol (10%)

Fatty Food, Food Simulant D1, Ethanol(50%)

(Referance TS EN 1186/1-15) ≤ 10 mg/dm2

 

Determination of Bisphenol A Migration (Aqueous Simulant)

(Referance BS EN 14350-2 / BS EN 14372) ≤ 0,6 mg/kg

 

IR Spektrum : ( Method FT-IR )

Analysis Result:  GLYCOL MODIFIED POLYETHYLENE TEREPHTHALATE
Shelf Life 2 years
Storage Conditions It should be stored in a place moisture-free, odor and no sunlight, dry and stored in a cool place.
Distribution and Transport Conditions
  1. It is carried by clean and odorless trucks.
  2. Keep away from direct sunshine.
  3. Store it in a dry place.
  4. Do not stow.
  5. Warehouse’s heat should be min: 4 0C / max: 45 0C.
Allergens No
Optionally Options Color: Production according to reference color

 

PE Lamination: Applicable on one surface

 

There may be deviations in the given values. These deviations may be due to technological reasons and therefore Armasan can not be indicted.

The values ​​are for unformed sheets. The assessment for the intended suitability is the responsibility of the customer.

 

 

Product METALİZED PET

Thickness: 100µ – 1000µ

Width: ≤1400mm ± 1mm

Coil diameter: ≤1200mm ± %3

 

Usage areas;

Forming, sealing lamination, source.
Compound Outer Layer: % 100 Original PET Resin or %100 Recycled PET

Middle Layer: %100 Original PET Resin or Recycled PET

A/A/A ,  A/B/A

A/B/A PET: With co-ex technology.

B-middle layer 70-80% R- Pet
Raw Material Specification Color: Silver – Gold standart or reference color

Elongation:  4 %

Tensile Strenght: 47 MPa

Impact Resistance:  595 KJ / m2

Melting Point:  243 oC

Density: 1,33 -1,38 g/cm3

Vicat softening: 80°C

Water absorption: 0,5 %

Wire flow rate: 70-90
Chemical Properties Determination of Overall Migration:

Fatty Food Alternative Simulant Isooctane

Fatty Food Alternative Simulant Ethanol 95%

Asidic Food, Food Simulant B, 3% Acetic Acid

Aqueous Food, Food Simulant A,Ethanol (10%)

Fatty Food, Food Simulant D1, Ethanol(50%)

(Referance TS EN 1186/1-15) ≤ 10 mg/dm2

 

Determination of Bisphenol A Migration (Aqueous Simulant)

(Referance BS EN 14350-2 / BS EN 14372) ≤ 0,6 mg/kg

 

IR Spektrum : ( Method FT-IR )

Analysis Result: POLYETHYLENE TEREPHTHALATE
Shelf Life 2 years
Storage Conditions It should be stored in a place moisture-free, odor and no sunlight, dry and stored in a cool place.
Distribution and Transport Conditions
  1. It is carried by clean and odorless trucks.
  2. Keep away from direct sunshine.
  3. Store it in a dry place.
  4. Do not stow.
  5. Warehouse’s heat should be min: 4 0C / max: 45 0C.
Allergens No
Optionally Options Color: Production according to reference color ( silver,gold,green,red, ect.)

 

Verilen değerlerde sapmalar olabilir. Bu sapmalar teknolojik nedenlerden kaynaklanıyor olabilir ve bu sebeple Armasan’a bir ithamda bulunulamaz.

Değerler şekillenmemiş levhalar içindir. Amaçlanan uygunluk için değerlendirme müşterinin sorumluluğundadır.